1. Try to avoid accumulation of water on the rain wear (within folds on the rainwear or at the crotch area on the motorcycle seat), as this might result in ingress of water over time. Smoothening the zipper flaps to avoid folds helps. To avoid accumulation of water on the motorcycle seat (at the crotch area) during continuous rain, standing up intermittently helps. 

2. You might experience moisture on the inner part of the rainwear caused by condensation due to the temperature differential between the outside atmosphere and your body heat. This is similar to what you can see on a glass of cold water, which develops water beads on the outside. Being a natural phenomenon the same is unavoidable. However this would not be to an extent where you would be completely wet.

PU laminated polyester fabric rated for 10000mm water column pressure Weight ~200 gms

For dirt and stains, wipe clean with a damp cloth and lukewarm water (DO NOT USE HOT WATER) 

DO NOT allow your rainwear to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. 

DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. 

DO NOT place your rainwear near, or come in contact with a direct heat source Dry the rainwear on a hanger away from direct sunlight where there is good ventilation. Zippers need to be cleaned and lubricated regularly - you can use Vaseline or candle wax 

STORAGE: 

Make sure your rainwear is completely dry before you store it on a hanger. If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage

Warranty : 

We provide a 6 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click here for details. 

Repairs :

Minor repairs of opened stitches, tears, Velcro etc. due to normal wear and tear can be done at a reasonable charge. Send us an email with pictures so we can determine if the jacket can be repaired or not. Please click here for details.